[1] |
陆守香,陈潇,吴晓伟.舰船消防安全工程研究现状[J].中国舰船研究,2017,12(5):1-12.LU S X,CHEN X,WU X W.Research status of warship fire safety engineering[J].Chinese Journal of Ship Research,2017,12(5):1-12.
|
[2] |
付泽南,董晓明.舰船灵活性概述[J].中国舰船研究,2017,12(5):13-21.FU Z N,DONG X M.Flexibility of warships:an overview[J].Chinese Journal of Ship Research,2017,12(5):13-21.
|
[3] |
王健,谢伟,王涛,等.基于目标分流方法的船舶概念方案多学科设计优化[J].中国舰船研究,2017,12(5):22-29.WANG J,XIE W,WANG T,et al.Application of analytical target cascading method in multidisciplinary design optimi-zation of ship conceptual design[J].Chinese Journal of Ship Research,2017,12(5):22-29.
|
[4] |
张彦儒,林焰,陆丛红,等.轻量化NURBS船体曲面自行设计垂向参数化方法[J].中国舰船研究,2017,12(5):30-37,45.ZHANG Y R,LIN Y,LU C H,et al.Lightweight hull surface self-design vertical parameterization method based on NURBS[J].Chinese Journal of Ship Research,2017,12(5):30-37,45.
|
[5] |
方雄兵,吴波.基于JT格式的船舶舱室三维模型自动提取方法[J].中国舰船研究,2017,12(5):38-45.FANG X B,WU B.Automatic method for extracting 3D ship cabin models based on JT format[J].Chinese Journal of Ship Research,2017,12(5):38-45.
|
[6] |
卢永进.基于IDEF0的设备装舰紧固件设计开发[J].中国舰船研究,2017,12(5):46-51.LU Y J.Fastener design development technology for warship equipment installation based on IDEF0[J].Chinese Journal of Ship Research,2017,12(5):46-51.
|
[7] |
吴梵,滑林.腐蚀、疲劳损伤下船体结构可靠性研究现状与展望[J].中国舰船研究,2017,12(5):52-63.WU F,HUA L.Current status and prospects of reliability analysis of hull structures under corrosion and fatigue damage[J].Chinese Journal of Ship Research,2017,12(5):52-63.
|
[8] |
叶礼裕,王超,李鹏,等.BEM/FEM耦合螺旋桨静强度计算方法[J].中国舰船研究,2017,12(5):64-74,83.YE L Y,WANG C,LI P,et al.Calculation of marine propeller static strength based on coupled BEM/FEM[J].Chinese Journal of Ship Research,2017,12(5):64-74,83.
|
[9] |
陆亚兵,王德禹.双向受压裂纹板剩余极限强度分析[J].中国舰船研究,2017,12(5):75-83.LU Y B,WANG D Y.Assessment of residual ultimate strength of cracked plates under biaxial compression[J].Chinese Journal of Ship Research,2017,12(5):75-83.
|
[10] |
王文禹,刘敬喜,赵耀.基于灰靶理论的船舶结构构件贡献度分析[J].中国舰船研究,2017,12(5):84-89,96.WANG W Y,LIU J X,ZHAO Y.Ship structural component contribution evaluation based on grey target theory[J].Chinese Journal of Ship Research,2017,12(5):84-89,96.
|
[11] |
叶曦,初文华,陈林,等.近自由液面气泡与冲击波的相互作用[J].中国舰船研究,2017,12(5):90-96.YE X,CHU W H,CHEN L,et al.Interaction between bubble near free surface and shock wave[J].Chinese Journal of Ship Research,2017,12(5):90-96.
|
[12] |
许小颖,周盼,王宽.基于神经网络和遗传算法的系泊优化设计[J].中国舰船研究,2017,12(5):97-103.XU X Y,ZHOU P,WANG K.Mooring optimization design based on neural network and genetic algorithm[J].Chinese Journal of Ship Research,2017,12(5):97-103.
|
[13] |
毕柯,李想,汤智胤,等.基于AMESim的滑轮缓冲器动力学建模与仿真[J].中国舰船研究,2017,12(5):104-108.BI K,LI X,TANG Z Y,et al.Dynamic modeling and simulation of sheave damper based on AMESim software[J].Chinese Journal of Ship Research,2017,12(5):104-108.
|
[14] |
岑卓伦,刘涛,王磊,等.大型LNG船发电机室的燃气管线泄漏分析[J].中国舰船研究,2017,12(5):109-119.CEN Z L,LIU T,WANG L,et al.Leakage analysis of fuel gas pipe in large LNG carrier engine room[J].Chinese Journal of Ship Research,2017,12(5):109-119.
|
[15] |
金正涛.大型舰船环状冷媒水系统运行模式试验研究[J].中国舰船研究,2017,12(5):120-125.JIN Z T.Experimental study on operating modes of refrigerant water loop system of large ships[J].Chinese Journal of Ship Research,2017,12(5):120-125.
|
[16] |
何文强,郑志豪,张万福.水蒸汽参数对密封动静特性的影响[J].中国舰船研究,2017,12(5):126-131.HE W Q,ZHENG Z H,ZHANG W F.Influence of steam parameters on static and dynamic characteristics of labyrinth seal[J].Chinese Journal of Ship Research,2017,12(5):126-131.
|
[17] |
谢栋,赵耀,董宏宝.船体中厚钢板局部热压成形中的回弹仿真分析[J].中国舰船研究,2017,12(5):132-140.XIE D,ZHAO Y,DONG H B.Numerical simulation of springback of medium-thick plates in local hot rolling[J].Chinese Journal of Ship Research,2017,12(5):132-140.
|
[18] |
闵少松,王中,王海霖,等.潜艇建造中的全站仪高精度转站方法[J].中国舰船研究,2017,12(5):141-146.MIN S S,WANG Z,WANG H L,et al.High accuracy station moving method for total station in submarine construction[J].Chinese Journal of Ship Research,2017,12(5):141-146.
|