Volume 4 Issue 5
Turn off MathJax
Article Contents
Abstract
References
Related Articles
Xu Shanshan, Zhang Aman, Xie Jinxin, Li Shiming. Evaluation Method for Structural Strength of Asymmetric Double Tube Sheet of Marine Condenser[J]. Chinese Journal of Ship Research, 2009, 4(5): 38-44. DOI: 10.3969/j.issn.1673-3185.2009.05.008
Citation: Xu Shanshan, Zhang Aman, Xie Jinxin, Li Shiming. Evaluation Method for Structural Strength of Asymmetric Double Tube Sheet of Marine Condenser[J]. Chinese Journal of Ship Research, 2009, 4(5): 38-44. DOI: 10.3969/j.issn.1673-3185.2009.05.008
shu

Evaluation Method for Structural Strength of Asymmetric Double Tube Sheet of Marine Condenser

  • School of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China

More Information
  • Received Date: May 03, 2009
  • Revised Date: June 12, 2009
  • Accepted Date: October 19, 2009
© 2009 The Authors. Published by Editorial Office of Chinese Journal of Ship Research. Creative Commons License
This is an Open Access article distributed under the terms of the Creative Commons Attribution 4.0 International License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
    Graphical Abstract
    • Abstract
  • With the development of industrial equipment, double tube condenser of asymmetric shells has been widely used, and traditional design standards are not suitable for strength evaluation of such structures. In this pap er, a model of an asymmetric double tube is developed by general-purpose commercial finite element analysis software HyperMesh and ABAQUS. Considering the work condition of tube pressure, shell pressure and combination of the two, a new checking method is proposed to evaluate the strength of asymmetric double tube shells. The result shows that the proposed way is efficient and feasible with thorough understanding and improved accura cy.
    • FullText(HTML)
    • References (7)
  • [1]
    OSWEI F. 管板设计中的有效弹性常数概念的进展与综合[J]. 丛敬同，宋伟业，译.化工设备设计，1990，27（2）：42-51.
    [2]
    刘俊明，陈绪. 高压厚管板的有限元分析计算[J]. 压力容器，1997，14（2）：25-29.
    [3]
    刘海亮，于洪杰，徐鸿，等. 高压给水加热器厚管板的有限元分析（一）——考虑管箱、壳体和换热管影响的管板有限元实体模型的建立及稳定温度场分析[J]. 压力容器，2004，21（11）：19-22，11.
    [4]
    徐定耿，叶维娟. 核电站蒸汽发生器管板三维有限元应力分析及其工程应用[J]. 核科学与工程，1990，10（2）：160-168.
    [5]
    UKADGAONKER V G，KALE P A，AGNIHORTRIN A，et al. Review of Analysis of Tube Sheets [J].International Journal of Pressure Vessels and Piping，1996，67 （3）：279-297.
    [6]
    刘海亮，于洪杰，徐鸿，等. 高压给水加热器厚管板的有限元分析（二）—考虑管箱、壳体和换热管影响的管板强度分析[J]. 压力容器，2004，21（12）：17-21，28.
    [7]
    季维英. 管壳式换热器管板应力的三维有限元分析[D].南京：南京理工大学，2006.
    • Related Articles

  • Related Articles

    [1]CHEN Fukang, YANG Jun, YUAN Yuchao, XUE Hongxiang, TANG Wenyong. Analysis of structural strength characteristics of hull girder under ice riding accident[J]. Chinese Journal of Ship Research, 2024, 19(2): 113-119. DOI: 10.19693/j.issn.1673-3185.03185
    [2]CHENG Ke, GENG Jichen, LIU Fanghua. Design and numerical analysis of drag chain structure for offshore platform[J]. Chinese Journal of Ship Research, 2018, 13(S1): 111-114, 120. DOI: 10.19693/j.issn.1673-3185.01125
    [3]WANG Qi, YUAN Jiansheng, ZHAO Qiming. Inductance calculation of submarine DC transmission line based on finite element analysis[J]. Chinese Journal of Ship Research, 2018, 13(1): 114-119. DOI: 10.3969/j.issn.1673-3185.2018.01.017
    [4]ZHOU Rui. 基于有限元的舰船推进轴系合理校中计算方法[J]. Chinese Journal of Ship Research, 2012, 7(3): 74-78. DOI: 10.3969/j.issn.1673-3185.2012.03.014
    [5]Liu Yongbao, Fang Youlong. The Finite Element Analysis for HPT Blade Tip Clearance Variation of Gas Turbine[J]. Chinese Journal of Ship Research, 2011, 6(6): 78-82. DOI: 10.3969/j.issn.1673-3185.2011.06.016
    [6]Shu Bin, Hu Gangyi, Xiao Wei Zhang, Yuansheng. 圆柱壳大开孔补强的应力集中分析[J]. Chinese Journal of Ship Research, 2011, 6(2): 35-39. DOI: 10.3969/j.issn.1673-3185.2011.02.007
    [7]Liu Xuesong, Zhou Yulong. Finite Element Analysis of the Global Strength of FRP Yacht with Sandwich Structures[J]. Chinese Journal of Ship Research, 2010, 5(2): 45-48. DOI: 10.3969/j.issn.1673-3185.2010.02.009
    [8]Zhao Dawei, Wang Yong, Wu Shengmin, Jiang Shan, Dong Renyi. 有限周期复合结构隔振系统的有限元分析[J]. Chinese Journal of Ship Research, 2009, 4(1): 43-46,51. DOI: 10.3969/j.issn.1673-3185.2009.01.009
    [9]Liu Jun, Yang Chuanwu. 小水线面船搁浅问题的有限元分析[J]. Chinese Journal of Ship Research, 2008, 3(5): 13-15. DOI: 10.3969/j.issn.1673-3185.2008.05.003
    [10]Ku Yun, Zhang Shaoxiong. Finite Element Analysis of Structural Strength of Half-typed Tiller[J]. Chinese Journal of Ship Research, 2007, 2(4): 41-43. DOI: 10.3969/j.issn.1673-3185.2007.04.009

Catalog

    Citation
    XML
    PDF in Chinese
    Article views (343) PDF downloads (1047) Cited by()
    Related

    网站版权所有 ©《中国舰船研究》编辑部

    Address：268 Zhangzhidong Rd, Wuhan 430064, ChinaTel：027-65235520 027-65235554Email：cjsr@ship-research.com

    鄂ICP备18014025号 鄂公网安备 42010602002448号

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return