Ji Fang, Yao Xiongliang. Acoustic Characteristics of Wedge Structure Taking Account of Cavity Energy Dissipation[J]. Chinese Journal of Ship Research, 2011, 6(3): 73-78. DOI: 10.3969/j.issn.1673-3185.2011.03.016
Citation: Ji Fang, Yao Xiongliang. Acoustic Characteristics of Wedge Structure Taking Account of Cavity Energy Dissipation[J]. Chinese Journal of Ship Research, 2011, 6(3): 73-78. DOI: 10.3969/j.issn.1673-3185.2011.03.016

Acoustic Characteristics of Wedge Structure Taking Account of Cavity Energy Dissipation

More Information
  • Received Date: July 20, 2010
  • Revised Date: September 08, 2010
  • Accepted Date: June 19, 2011
© 2011 The Authors. Published by Editorial Office of Chinese Journal of Ship Research. Creative Commons License
This is an Open Access article distributed under the terms of the Creative Commons Attribution 4.0 International License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • Taking horn cavity as an example, the rule of sound propagation in cavity was researched, and the amended calculation method taking account of energy dissipation in the cavity was summed up. The validity of calculation method was also verified through sound pulse pipe test. Furthermore, the vibration and self-noise distribution of sonar platform was predicted through numerical experiment. The influence of cavity wedge laying conditions to sonar platform acoustic characteristics was analyzed. The results show that the cavity acoustic energy absorption is very effective in low frequency, and the calculation of cavity wedge acoustic performance must be taken into account below 3kHz.The laying of cavity wedge obviously reduces the vibration level and total self-noise level of sonar platform, part laying method of wedge must consider the pressure distribution of sonar array.
  • [1]
    朱金华,王源升.水声吸声高分子材料的发展及应用 [J].高分子材料科学与工程,2005,21(4):46-50.
    [2]
    姜闻文,陈光冶,朱彦.静水压变化下橡胶结构吸声性能 的计算与分析[J].噪声与振动控制,2006,(5):55-57.
    [3]
    杨雪,王源升,余红伟.梯度聚氨酯吸声性能研究[J].武 汉理工大学学报,2008,30(3):21-23
    [4]
    HABERMAN M R,YVES H B,JARZYNSKI J,et a1. Micromechanical modeling of viscoelastic voided composites in the low frequency approximation [J].J.Acoust.Soc. Am,2002,112(5):1937-1943.
    [5]
    王仁乾,马黎黎.基材含微粒的空腔结构吸声器吸声性 能预报的研究[J].声学技术,2006,25(3):175-181.
    [6]
    ONURSAL O,MEHMET C.Design of a single layer micro-perforated sound absorber by finite element analysis [J].Applied Acoustics,2010,71(4):79-85.
    [7]
    何曼君,陈维孝,董西侠.高分子物理fM].复旦大学出版 社.
    [8]
    DAVID M.Acoustic waves in elastic solids/M].soon Press Oxon,2007.
    [9]
    ZOU J,SHEN Y,YANG J,et a1.A note on the prediction method of reverberation absorption coefficient of double layer micro-performed membrane[J].Applied Acoustics, 2006,67(2):l06-111.
    [10]
    姚熊亮,计方,庞福振,等.聚氨酯空腔尖劈吸声性能实 验研究[J].振动与冲击,2010,29(1):88-93.

Catalog

    Article views (277) PDF downloads (726) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return